A Synergy amplifier designed for driving the left, right, and center channels of a surround-sound setup.
The Synergy 240/3 is a three channel Synergy power amplifier designed for home theater systems. You don’t lose any of the magical and open sound of the bigger Synergy amplifiers. The sound stage is there, the dynamics are there, and the purity is there.
The faceplate is our silver 1/4" thick sculpted aluminum faceplate. A cost-saving 1/10" aluminum black faceplate with a rocker power switch is also available. Both faceplates feature our incredibly durable double anodized finish.
Synergy amplifiers are Class A/B, and are biased as Class A at normal listening levels. The Synergy series of amplifiers have no overall feedback, so that feedback cannot overload the input circuits. Feedback exists only as a unique active buffered powered loop matched to the active buffered input parameters.
Synergy amplifiers are uniquely DC stable. They are so stable that there is no need for the typical DC balance adjustments. This means Synergy amplifiers will not generate speaker damaging DC drift even when driven past clipping.
The combination of our design ideas allow the amplifiers to run cooler, last longer, and be amazingly fault tolerant.
The Synergy 240/3 has half the current capacity of the Synergy 300, but still produces 120 watts per channel, 20 to 20 kHz into 8 ohms at less than 0.01% THD. Six mos-fet output transistors, standard on the Synergy 240/3; can drive 4 Ohm and up speakers. The Synergy 240/3 is an excellent amplifier for home theater speakers.
Power Supply Circuits
The Synergy 240/3 has a custom made oversized high capacity shielded toroid power transformer feeding 12 active and independent regulated supplies to provide incredible dynamic range, bass extension, transient detail, and air. All of the power supply parts are selected for long life, reliability and operate well within their technical specification ratings.
A unique engineering feature is that all Synergy power amplifiers have regulated power supplies for the output transistors which provide unequaled bass control and micro dynamics.
The Synergy 240/3 operates with standard 120 Volt power, has an IEC power jack, and includes a polarized 120V power cord. For international use a 240 Volt (50-60 Hz.) option is available at additional cost.
Dimensions: 17" wide, 13" deep, 7" high. Shipping weight is 32 pounds.